Verified geometry · not area ÷ tile

Ten packs.
Not nine.

The ten percent rule says nine. It leaves you one pack short.

Free tile and flooring layout planner. Your exact layout and cut list, in minutes. Tiles, LVT, or wood flooring.

See a worked plan
No signup Runs in your browser Metric or imperial
Try it — drag a wall 1200 × 200 mm plank · 3 mm joint
Computed here
3.65 m4.20 m
11 pieces are thinner than a third of a plank — drag a wall or change the pattern
Area
15.33 m²
Packs
10
Waste
16.0%
Slivers
11

Every figure above is computed from the drawn polygon, not from area × a buffer.

What the other calculators do not tell you
where the cuts land which pieces are too thin to lay what the offcuts cover
01 The same room, two answers

A tile calculator divides your area and adds ten percent. That number is not a plan, and it is not the number you should be buying against.

The ten percent rule Area ÷ tile + 10%
9 packs
no cut list
no idea where the thin pieces fall
obstacles ignored, doorways ignored
offcuts counted as waste, never reused
Computed, live
Herron, from your drawn room 84 pieces clipped
10 packs 1 pack short
34 cut pieces, each one numbered and sized
11 thin pieces flagged before you buy
16.0% waste, with 10 pieces cut from offcuts
Irregular rooms, obstacles, and doorways all laid out

Why it matters

Nobody wants a floor that is nearly right. You want the pack count, the cut list and the price settled before the van arrives.

02 Four minutes, start to cut list

Three inputs you already have, and one plan you can build from.

3.60 m
STEP 01

Draw the room

Type two dimensions, drag the walls, or import a DXF. Alcoves, islands and doorways are all first class, not an afterthought.

Oak, 1200 × 200 £34.50
Slate, 600 × 600 £28.00
LVT, 1220 × 180 £41.20
STEP 02

Choose the material

Search supplier catalogues for real sizes, pack coverage and prices, or enter your own. Twenty-four patterns, from straight lay to herringbone.

Cut list 18 pieces
07 1200 × 200
08 640 × 200 rip
09 88 × 200 sliver
10 820 × 200 from 08
STEP 03

Take the plan to the floor

A numbered cut list, a material order, and a step by step laying sequence. Share it as a link or a PDF, because the planner is rarely the fitter.

04 Twenty-four patterns

Pick a pattern and the whole plan recomputes.

Pattern changes the waste, the cut count and the sequence, so it is a decision worth seeing rather than guessing. Open any of these straight into the editor.

THE COMMON EIGHT 8 patterns the four-up grid in the drawer
PLANKS & OFFSETS 6 patterns one strategy, differently parameterised
PARQUET 6 patterns blocks that read as one figure
HERRINGBONE 2 patterns the two that are not the same
TILE SHAPES 2 patterns where the tile is not a plank
05 What leaves with you

Three documents, and none of them need an account.

OUTPUT 01

Cut sheet

Every piece numbered in laying order, with its finished size and the board it came from.

Pieces
84
Cuts
34
From offcuts
10
OUTPUT 02

Material order

Pack count against real pack coverage, with your own waste buffer, priced to the piece.

Packs
10
Waste
16.0%
OUTPUT 03

Laying sequence

Step through the floor piece by piece on the drawing, or send it as a link to whoever is laying it.

Rows
21
Share link
Read only
Export
PDF · DXF

Every figure above is the computed layout the hero opens on.

06 Before you start

The questions people ask on the way in.

Still stuck? The guides work through a full room, start to finish.

Yes — every planning feature is available to everyone, with no account and no card. Draw the room, lay the pattern, take the cut list. The assistant is the one metered part, because every message costs us real compute; the planner itself does not become a paid tier.

Bring a tape measure.
Leave with a cut list.

No account, no paywall on the planner, nothing to install. Your first room takes about four minutes.

Free · no signup · works on the phone in your pocket